Your tyres are made up of several materials and chemicals but rubber is the most common tyre material. If you consider it carefully, you will find that your tyres are unable to get a proper shape without air. Air is vital to maintain the shape of your tyres and it also carries the total weight of your vehicle. Because of this reason, tyres have a tube that is filled with compressed air.
We are talking about the rubber material and the role of air since we wish to discuss the effects of heat on your tyres. It is obvious that rubber deforms due to heat and friction. Can we avoid heat or friction? No, we cannot do it and your tyres have to face these two important factors if you want to roll on the road surface.
Moreover, air pressure is also directly linked to temperature. As it is easy to understand, the effects of heat will be more deadly in the summer months. Probably you are aware of the fact that pressure is directionally proportional to temperature. It clearly means that the added heat will increase the air pressure and less heat will result in lower air pressure.
When your Dunlop Tyres Airdrie are overheated, they may become over-inflated. An over-inflated tyre causes poor handling and reduced driving comfort. Your carmakers make tyres with specified air pressure. Therefore, you have to keep the air pressure at the specified level.
Why does heat increase the air pressure?
During the summer season, a heated road surface makes the tyres super hot as well. Moreover, environmental heat also plays a role in making the rubber material extremely hot. As a result, the air inside the tyre also becomes hot and its molecules start to move rapidly due to the impact of heat. Therefore, air expands in the summer season to cause overinflation.
What should you do to properly inflate your tyres?
You need to check the air pressure regularly in every season. This rule remains the same in all the weather conditions. If you observe your tyres are over-inflated, you have to bring the air pressure to the optimum level. Do not start your journey with under-inflated tyres to balance the over-inflation due to heat. This is not a wise approach.
Heat and rubber material
Tyre makers manufacture tyres with the help of both natural and synthetic rubber. Therefore, tyre’s body has natural oils that keep tyres flexible.
The heat coming from direct sunlight is enough to negatively affect these natural oils and the rubber becomes brittle. Brittle rubber usually shows cracks on the body of your tyres. Heat permanently damages the tyre’s body. You should not drive on these damaged tyres even when sufficient tread is left on the tyres.
Heat disturbs the construction of your tyres
Tyres Airdrie are made with the use of two layers of rubber. The outer layer is the tread part and the inner section is the inner liner. These layers are stacked together.
When the road surface is extremely hot, these layers may be separated from each other to cause tread separation. Tread separation is a dangerous phenomenon that may result in the disintegration of the tyres. If it happens in the middle of the road, you may lose control of the vehicle.
To save your vehicle from all these bad effects, it is vital you keep your tyres cool. Therefore, do not drive the vehicle for a long time. You should stop your car to let the tyres cool down.
Check the air pressure regularly to keep your tyres properly inflated. Proper inflation is essential for the proper functioning of your tyres in the summer season.
The chances of the effects of heat are higher if you run your car at high speed. Therefore, you should slow down your speed to save your tyres from overheating.
We are sure if you use these tips, you will keep your tyres healthy for a long time. Tyres are an integral part of your vehicle and they need to be properly maintained.
