Have you ever thought about how much your car tyres endure on the roads? Well, this thought hardly crosses our minds. That’s because tyres are meant to be sturdy and robust. They are the ones who directly touch the roads. Naturally, any kind of rocky patches, muddy terrains, potholes and kerbs are all born by the tyres. Despite this, they continue giving you that exceptional performance so that you remain safe on the roads.
Therefore, as the end-user of the product, you must gather all the information about these tyres. It’s very important that you know what type of tyres you are buying, the size of your tyres and the kind of tyres Stafford that suit your vehicle. Apart from this, there are certain labels on the tyres which most people are unable to decipher. This blog is going to help you with just that. Tyres are not made to be immortal. They also have a fixed life.
What are tyre labels and why should you know them?
Tyre labels provide you with all the information about tyres, provided you know how to read those labels. Tyres are pit into three categories and they are rated on a scale of A to E. Here, ‘A’ being the best and ‘E’ being the least in terms of performance. All tyres pass through rigorous testing and that’s how they are labelled.
- Fuel efficient tyres
It all depends on the low rolling resistance. If your tyres have low rolling resistance, they are bound to be fuel-efficient.
- Performance of tyres on the wet surface
Tyres that pass this test with flying colours have shorter braking distances even in wet conditions.
- Noise created by the tyre
External noise created by the tyre is very important to be measured. This noise is measured in decibels. This is shown by the symbol of sound waves on the tyres.
What are those tyre markings on the tyres?
There are numbers on the tyres which tell a lot about them. These numbers specifically helpful when you have to change the size of the tyres. For instance, if you have tyre markings as 204/40 R16 90W, then here –
- 204 refers to the width of the tyre and this is measured in millimetres.
- 40 is the ratio of the tyre in relation to its width and height.
- R refers to the radial tyre.
- 16 is the size of the tyre in inches. It’s actually its diameter.
- 90 is the load index rating of the tyre.
- W refers to the maximum speed a tyre can run.
What does the tread of the tyre mean?
The tread is that part of the tyre which is in direct contact with the roads. There are different types of tread patterns and they are designed according to the vehicle they are meant for. The UK government has fixed a tread limit. If the tyres go below the limit of 1.6mm, it’s time to buy new tyres. For winter car tyres Cannock, the same limit is fixed at 3mm.
How can you check the tread pattern yourself?
You can do a 20p coin test to check the tread yourself. If the outer rim of the coin goes inside the grooves of the tyres completely, that means tyres are fine and can still be used.
How can you increase the life of your tyres?
A simple rule goes by here. If you take care of your car tyres, they are going to take care of you.
- Avoid abrupt braking.
- Control your speed when driving on uneven surfaces, especially over rock-strewn tops.
- Keep checking your tyre pressure every few weeks, as both under-inflated and over-inflated tyres can be dangerous.
Tyres are one of the most significant parts of the vehicle and they need your attention.